AUDIO SPECIFICATIONS
Rated Power at
IHF Dynamic Power
Signal/Noise Ratio (A-weighted)
Channel Separation
Channel Balance
Frequency Response (20Hz - 20kHz)
Total Harmonic Distortion
Maximum input level
IMD (SMPTE)
IMD (CCIF)
GENERAL SPECIFICATIONS
Standby Power
Supports bit rate/sample rate
Unit Dimensions (W x H x D) Gross*
Net Weight
Shipping Weight
* Gross dimensions include extended buttons and rear panel terminals.
** Non-metric measurements are approximate. NAD Electronics will not assume any liability for errors being made by retailers, custom installers,
cabinet makers, or other end users based on information contained in this document.
Note: Installers should allow a minimum clearance of 55mm for wire/cable management.
Specifi cations
8 ohms
2 x 30 Watts
8 ohms
2 x 65 Watts
4 ohms
2 x 105 Watts
2 ohms
2 x 150 Watts
≥90dB
1kHz
≥75dB
10kHz
≥65dB
0 ±0.3dB
0dB to -0.3dB
≤0.005%
5V
0.02%
0.003%
≤0.5 Watts
up to 24/192 (via Digital Audio input)
up to 24/96 (via Computer/Type B USB input)
58 x 186 x 219mm
2 5/16 x 7 3/8 x 8 5/8" **
1.38kg (3.05lb)
2.1kg (4.6lb)
5
D 3020