Sony PMW-200 Service Manual page 61
Solid-state memory camcorder
Hide thumbs
Also See for PMW-200:
- Operating instructions manual (141 pages) ,
- Service manual (23 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
5.
Remove the two tapping screws (2 x 5) to detach the LCD shield plate.
Claws
LCD conductive tape
Main gaskets (H)
Tape 50
LCD shield plate
6.
Disconnect the harness from the connector CN100 on the IF-1188 board.
7.
Disconnect the flexible board from the connector CN300 on the IF-1188 board, and remove the ferrite core.
8.
Remove the IF-1188 board and hinge.
9.
Peel off the tape 25.
IF-1188 board
CN300
Ferrite core
Flexible board
10. Remove the panel retainer and panel ground plate, and then remove the LCD panel.
11. Peel off the UL tape W8L25.
PMW-200/PMW-EX280
LDC cabinet
CN100
Hinge
Precision screws (M2 x 5)
Tapping screws
(2 x 5)
Precision
screw (M2 x 4)
Precision
screw (M2 x 4)
Tape25
Harness
2-31
Advertisement
Table of Contents
