2-6.
Top Panel Assembly
Preparation
1.
Remove the battery lid. (Refer to
2.
Remove the bottom cover. (Refer to
3.
Remove the inside panel assembly. (Refer to
4.
Remove the outside panel assembly. (Refer to
Procedure
1.
Remove the four screws.
2.
Remove the top panel, waterproof sheet (IN), and waterproof sheet (OUT).
3.
Install the removed parts by reversing steps of removal.
PMW-200/PMW-EX280
"2-2. Lithium
Battery".)
"2-3. Bottom Cover and Tripod
"2-4-1. Inside Panel
"2-5-1. Outside Panel
Waterproof sheet
(OUT)
Washer".)
Assembly".)
Assembly".)
Precision screws
Precision screws
(M2 x 5)
(M2 x 5)
Waterproof sheet (IN)
2-12