2-10.
CN-3540 Board
Preparation
1.
Remove the battery lid. (Refer to
2.
Remove the bottom cover. (Refer to
3.
Remove the outside panel assembly. (Refer to
Procedure
1.
Disconnect the flexible flat cable from the connector CN101 on the CN-3540 board.
2.
Disconnect the harness from the connector CN103 on the CN-3540 board.
3.
Remove the two screws to detach the CN-3540 board.
Harness
CN-3540 board
4.
Install the removed parts by reversing steps of removal.
PMW-200/PMW-EX280
"2-2. Lithium
Battery".)
"2-3. Bottom Cover and Tripod
"2-5-1. Outside Panel
Flexible flat cable
CN101
P2 x 4
CN103
Washer".)
Assembly".)
2-19