Omron NX-SL3300 User Manual page 288

6 Programming
Let-
Name
ter
(a) Operation
Panel
(b) Basic Set-
tings
6 - 72
(a)
(b)
(c)
(d)
(e)
The operation panel is used to make settings for and execute the automatic programming.
Generate Button
Register Variables Button
Import Button
Export – CSV File Output
Export – Export to Simple Au-
tomatic Test
Export – Export to Online
Functional Test
Set the variable to use as a reset signal for the safety program. You can set any SAFE-
BOOL or BOOL variable that is defined in the global variable table.
When a program is generated, the variable name for the configured reset signal is assigned
to the input variable Reset of the safety function block that is linked to each input signal.
Function
Generates a program using the automatic programming.
Registers the variables that are used for the automatic
programming.
Imports the settings for the automatic programming from a
CSV file.
If you import the settings, the current settings are overwrit-
ten.
Exports the current automatic programming settings to a
CSV file.
Exports the current automatic programming settings to the
simple automatic test settings.
The settings of the export destination are overwritten.
Exports the current automatic programming settings to the
online functional test settings.
The settings of the export destination are overwritten.
NX-series Safety Control Unit User's Manual (Z930)