Omron NX-SL3300 User Manual page 196

5 System Configuration and Setup
3
Select a device from the Toolbox to connect to the safety input terminal or safety output termi-
nal of the Safety I/O Units, and drag it to the desired I/O terminal.
When you drag the device to connect to a terminal where it can be dropped, a + mark appears
below the mouse cursor as shown below.
4
When you complete the settings, the following is displayed. Change the settings and enter
comments.
5 - 24
Enter a comment.
Drag & Drop
NX-series Safety Control Unit User's Manual (Z930)