Installing Additional Packages - NEC Express5800/R320f-E4 Installation Manual

Express5800 series, vmware
Hide thumbs Also See for Express5800/R320f-E4:
Table of Contents

Advertisement

Chapter 1 Installing OS

1.11.2 Installing Additional Packages

Connect to the ESXi host from Host Client to configure.
1.
Insert the ft control software installation DVD into the DVD drive of the machine to be connected to the
ESXi host from the Web browser.
2.
Connect from the Web browser to the ESXi host, select [Virtual Machines] of Navigator, and select the
ft management appliance from the list. Select the [Console] tab and [Launch remote console], and
start up the remote console (VMRC).
3.
Select the [VMRC] menu on the remote console screen, select [Removable Devices], [CD/DVD drive
x], and [x.Connect to x], and connect to the DVD drive in which the ft control software installation DVD
is inserted.
4.
Log in to ftSys Management Appliance as a root user.
5.
Mount the ft control software Install DVD. When /mnt/cdrom directory exists, the making of the
directory is unnecessary by mkdir command.
# mkdir /mnt/cdrom
# mount /dev/cdrom /mnt/cdrom
6.
Run the installer of additional package.
• When ftSys Management Appliance is set as the log server
# /mnt/cdrom/NEC/install.sh
• When a separate Linux server is set as the log server
# /mnt/cdrom/NEC/install.sh –a
7.
Select a keyboard layout ("us" for English 101 or "jp" for Japanese 106), and press Enter.
Please choose a keyboard layout: [us(101) | jp(106)]
8.
Select a language (English or Japanese) for NEC ESMPRO report table and enter "E" or "J".
Please choose a language for ESMPRO alert messages: [E(nglish) | J(apanese)]
9.
The IP address of the ESXi host is displayed.
Make sure that the IP address shown is correct, enter the root password for the ESXi host, and press
Enter.
ESXi host: xxx.xxx.xxx.xxx
Enter the root password:
10.
The message prompting you to configure the log server appears. Enter the IP address of log server or
the machine name, and press Enter. You can skip this step and set it later. (In that case, see Chapter
3 (1. Steps for Configuring the Separate Log Server).
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Installation Guide (VMware)
62
Important
Do not add the ESXi host to vCenter Server until the installation has been completed.
Tips
Select the keyboard layout of the machine in which the Host Client is installed.
Note
If using a separate Linux server as the log server, this message will not appear.
Tips
NEC ESMPRO Report Table installed in this step is used by NEC ESMPRO Agent. See
Chapter 2 (1.1 NEC ESMPRO Agent) for detail of NEC ESMPRO Agent.
1. Setup Procedure

Advertisement

Table of Contents
loading

Table of Contents