Setup After Installing Ft Control Software; Log Server - NEC Express5800/R320f-E4 Installation Manual

Express5800 series, vmware
Hide thumbs Also See for Express5800/R320f-E4:
Table of Contents

Advertisement

Chapter 1 Installing OS
1.11

Setup after installing ft control software

1.11.1 Log Server

VMware ESXi 5.0 or later version does not include a service console. Therefore, this model achieves the syslog
reporting by forwarding the logs generated by ESXi to the log server on which NEC ESMPRO Agent is installed.
To use ftSys Management Appliance as the log server, no additional steps are required after following the steps
in Chapter 1 (1.11.2 Installing Additional Packages
server) and Chapter 2 (1.1 NEC ESMPRO Agent)) of this document, because the log server will be
automatically configured and forwarding the logs generated by the ESXi becomes available.
The case of using ftSys Management Appliance as the Log Server.
(ftSys Management Appliance)
Forward ESXi logs
The case of using other Linux server as the Log Server.
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Installation Guide (VMware)
60
Note
To use any other server than ftSys Management Appliance as the log server, you need to
prepare a Linux server separately. See Chapter 3 (1. Steps for Configuring the Separate
Log Server) of this manual for how to configure the Linux server.
syslog report
Log Server
VM
NEC
ESMPRO
Agent
OS
ftSys Management Appliance
VM
OS
VMware ESXi
ft Server
Note
If the log server is restarted alone, the log generated during restart is not transferred to log
server.
If the log server is restarted due to restart of ESXi host, the log generated on ESXi host
during the period from the startup of ESXi host to restart of log server, is not transferred to
log server.
After the log server completes its startup process, the log transfer from the ESXi host does
not resume automatically. Thus, run the following command to reload the syslog daemon..
# esxcli –s <IP address or hostname of ESXi host> system syslog reload
When ftSys Management Appliance is set as the log
Management PC
VM
VM
OS
OS
VMware ESXi
ft Server
syslog report
Management PC
VM
VM
OS
OS
Forward ESXi logs
LAN
1. Setup Procedure
NEC ESMPRO Agent
Linux OS
Log Server

Advertisement

Table of Contents
loading

Table of Contents