Main Menu; Figure 4.2. Main Window (Factory Settings) - Contec IPC-PT/L600S(PCW)P User Manual

Main Menu

Main Embedded
System Time:
System Date:
Legacy Diskette A:
Legacy Diskette B:
Floppy Drive Swap:
3 MODE floppy:
Primary Master
Primary Slave
Secondary Master
Secondary Slave
System Memory:
Extended Memory:
↓
F1 Help
←→ Select Menu
Esc Exit

Figure 4.2. Main Window (Factory Settings)

System Time
System date
Diskette A
Diskette B
Floppy Drive Swap
3 Mode floppy
IPC-PT/L600S(PCW)C, IPC-PT/L600S(PCW)P, IPC-PT/H600X(PCW)C, IPC-PT/H600X(PCW)P
PhoenixBIOS Setup Utility
Advanced
[09:21:27]
[01/01/1993]
[1.44/1.25 MB
[Disabled]
[Disabled]
[Disabled]
[4312MB]
[None]
[None]
[None]
640 KB
64512 KB
Select Item -/+
Enter Select
: Sets the time on the equipment calendar
: Sets the date on the equipment calendar
: Specify the type of FDD to be used as
: Connection not allowed. Set to
: Set to "Disabled."
: Set to "Disabled."
Security Power
1
3 / "]
2
Change Values
Sub-Menu
clock.
clock.
drive A. If you are not using the FDD,
set to "Disabled." Do not set to
"2.88MB" since it is not supported.
"Disabled."
BIOS Setup
Boot Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
29