Safety, Installation And Warranty Requirements; Licensed Professional Heating Contractor; Product Documentation; Advice To Owner - Viessmann VITOCELL 300-H Installation Instructions Manual

Introduction

Safety, Installation and Warranty Requirements

Please ensure that these instructions are read and understood before commencing installation. Failure to comply with
the instructions listed below and details printed in this manual can cause product/property damage, severe personal
injury, and/or loss of life. Ensure all requirements below are understood and fulfilled (including detailed information
found in manual subsections).

Licensed professional heating contractor


The installation, adjustment, service and maintenance
of this equipment must be performed by a licensed
professional heating contractor.
 Please see section entitled
"Important Regulatory and Installation
Requirements".

Product documentation


Read all applicable documentation before commencing
installation. Store documentation near product in a
readily accessible location for reference in the future
by service personnel.
 For a listing of applicable literature,
please see section entitled "Important
Regulatory and Installation Requirements".
2
Vitocell 300-H, EHA Series Installation

Advice to owner


Once the installation work is complete, the heating
contractor must familiarize the system operator/
ultimate owner with all equipment, as well as safety
precautions/requirements, shutdown procedure, and
the need for professional service annually before the
heating season begins.

Warranty


Information contained in this and
related product documentation must
be read and followed. Failure to do
so renders the warranty null and void.
CAUTION
The heat transfer medium must either be potable
water or contain only substances which are recognized
as safe by the U.S. food and drug administration.
The pressure of the heat transfer medium must be
maintained less than the normal minimum operating
pressure of the potable water system.