Error Codes - Saeco SUP032BR Operation And Maintenance Manual

36

ERROR CODES

GUIDE MESSAGE THAT APPEARS
out of service (xx)
restart to fix...
close coffee bean lid
fill container wth coffee
insert the brew group
insert grounds drawer
empty grounds
empty grounds drawer
close door
fill the water tank.
empty the drip tray
change the filter
carafe missing
milk island missing
descale
stand-by...
energy saving...
HOW TO REMOVE THE MESSAGE
seconds turn the machine on again to restore normal
operation.If the problem persists, call the service centre and
give the code (xx) shown on the display.
Close the coffee bean hopper cover to be able to make a
beverage.
Put coffee beans into the bean hopper.
Insert the brew group in its place.
Insert the coffee grounds drawer.
Warning that does not block the machine. Proceed as for
the next alarm.
Remove the grounds drawer and empty the grounds into an
appropriate container (See page 34, steps 4 and 5.).
Note: The grounds drawer must be emptied only when
the machine requires it and when the machine is turned
on. If you empty the drawer with the machine turned off
it will not record the emptying operation.
In order for the machine to operate, the side door must be
closed.
water.
Open the side door and empty the drip tray located under
the Brew Group.
cases:
1. 60 litres of water have been dispensed;
2. 90 days have passed since its installation;
3. 20 days have passed and the machine has not been
used.
Note: this message only appears when "on" has been
The steam knob has been turned to the
either the Milk Island has not been installed or the carafe is
not positioned correctly. Install the Milk Island or position
the carafe correctly.
Otherwise, turn the knob until it is in the rest position ( ).
A descaling cycle must be performed on the machine's
internal circuits.
Press the button.
position and