Troubleshooting - Saeco SUP032BR Operation And Maintenance Manual

P
ROBLEMS
The machine does not turn on.
Hot water or steam is not
dispensed.
Coffee has little crema.
Brew Group
The does not come
out.
Coffee is not brewed.
Coffee is brewed slowly.
Coffee leaks out of the dispensing
head.
Please contact the service centre for any problems not covered in the above table or when the suggested
solutions do not solve the problem.
C
AUSES
The machine is not connected to the
power source.
The plug has not been plugged into the
back of the machine.
The hole of the steam spout is clogged. Clean the hole of the steam spout using a
The coffee blend is unsuitable or coffee
is not freshly roasted.
SBS system knob turned towards the
left
Brew Group
The is out of place.
Coffee grounds drawer is inserted.
Water tank is empty.
Brew group is dirty.
Brew group dirty.
Dispensing head is clogged.

TROUBLESHOOTING

S
OLUTIONS
Connect the machine to the power
source.
Insert the plug into the machine's power
socket.
pin.
Change coffee blend.
Turn the SBS system knob to the right
Turn the machine on. Close the service
Brew Group
door. The
placed in the correct position.
Brew Group
.
Fill the water tank and prime the circuit
again.
Brew Group
Clean the
Change coffee blend.
Decrease the dose.
Brew Group
Clean the
Clean the dispensing holes with a soft
cloth.
37
is automatically
.
.