Pioneer AVIC-X3/XU/EW5 Service Manual page 146

1
- TOUCH TEST
Screen configuration
The coordinate before correction and after correction at the time of the touch panel pressing are displayed to verify
A
the operation.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
1
2
3
4
5
B
6
7
8
9
Operational specifications
Touch the touch panel to display the coordinate. Verify the coordinate before correction and the coordinate after
correction by the factory setting. Return to the top MENU by pressing the MENU key.
C
- LINE TOUCH TEST
Outline
Press the "+" cursors on the screen one by one to judge OK/NG of the touch panel.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
1
+ 13
2
D
3
+ 14
4
5
+ 15
6
7
+ 16
8
9
E
*) The above numbers indicate the order that the cursors are displayed.
Operational specifications
Press the cursors displayed at 16 locations on the screen one by one for inspection.
After the 16th location has been displayed, "OK" will be displayed in the center of the screen. After 2 seconds, the
screen will return to the top MENU.
The cursor is displayed only one at a time, and the next cursor will be displayed when the previous one has been
pressed correctly.
If not pressed correctly (if not within the OK range), "OUTSIDE OF THE RANGE" will be displayed.
If the MENU key is pressed before pressing 16 locations, NG will be displayed, and after 2 seconds, the screen will
return to the top MENU.
F
146
1
2
T O U C H
[ B F R A F T 1
X [ 9 9 9
Y [ 9 9 9
Coordinate before calibration
Coordinate after correction by the factory setting
+ 12
+ 11
+ 10
+ 9
AVIC-N4/XU/UC
2
3
T E S T
A F T 2 ]
9 9 9 9 9 9 ]
9 9 9 9 9 9 ]
Coordinate after correction by the user setting
+ 5
+ 6
+ 7
+ 8
3
4
+ 4
+ 3
+ 2
+ 1
4