Pioneer AVIC-X3/XU/EW5 Service Manual page 102

1
3-9. GPS Receiving Status
A
B
• GPS receiving status will be displayed.
• Conditions to move on to the next inspection.
Antenna connection is OK.
Data is received from one or more satellites.
Time is being displayed.
• When all the conditions are met, the background color will change to blue.
• Only when all the conditions are met, you can move on to the next inspection by the [8] key on the DVD remote
controller. It should be noted, however, that you will not be able to move on to the next inspection if there is an
error (background color is red) even if the conditions are met.
• If a command error occurs during GPS Receiving Status inspection, Command Error Details Screen is displayed.
Command Error Details Screen consists of a screen which displays the real-time status of the BIOS call which is
C
used in GPS reception, and a screen which displays command error logs of maximum 40 events, with the last –
occurred command error being at the top. You can switch between them by the [5] key.
* For the purpose of error information retention, the system prevents you to go from the Command Error Details
Screen back to the normal inspection screen. If you want to resume inspection, eject the test disc once and then
insert it again.
<Supplemental explanation regarding error display>
Displayed message
No connection to
DRAGON
D
Command error
Invalid data
3-10. Dual Illumination Check
E
• The color of illumination is changed.
F
• The illumination color is toggled between Red and Blue every time you press the [0] key on the DVD remote controller.
• You can move on the next inspection by the [8] key on the DVD remote controller.
102
1
2
Details of the Error
Error which occurs when communication with DRAGON is not established.
Communication error due to a hardware problem could be the cause.
It is highly possible that the hardware on the DRAGON side is defective.
Time-out error for response to BIOS call.
Communication error due to a hardware problem could be the cause.
It is highly possible that the hardware on the DRAGON side is defective.
Error which occurs when request is made while the data for response is not yet
ready (not obtained from DRAGON).
Communication error due to a hardware problem could be the cause.
It is highly possible that the hardware on the DRAGON side is defective.
AVIC-N4/XU/UC
2
3
3
4
4