Adjusting Color; To Select The Display Mode (Color Mode); To Perform Advanced Adjustments - Eizo FlexScan EV2430 User Manual

2-3. Adjusting Color

●

To select the display mode (color mode)

This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
User1
User2
sRGB
Paper
Movie
Procedure
1. Press .
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Setting menu and the Mode menu cannot be displayed at the same time.
●

To perform advanced adjustments

The "Color" menu of the Setting menu allows you to set and save the independent color adjustment for each
mode.
Attention
• It takes about 30 minutes for the monitor display to stabilize. Please wait 30 minutes or more after the monitor power
has been turned on, and then adjust the monitor.
• Perform the range adjustment first when adjusting color for analog signals (see
automatically" (page
• The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics.
Make fine color adjustment visually when matching colors on multiple monitors.
14
Chapter 2 Adjusting Screens
Select this to define a desired set of parameter settings.
Suitable for color matching with sRGB compatible peripherals.
Produces a printed paper effect. Suitable for displaying images from media such as books
and documents.
Suitable for playing back animated images.
The mode menu
appears.
or while the mode menu is displayed.
21)).
Purpose
is pressed.
"To adjust color gradation