Humidifier Performance - ResMed S9 Elite Information Manual

Cleanable water tub
Water tub
Air tubing technical specifications
ClimateLine air tubing
SlimLine air tubing
Standard air tubing
Heated tubing temperature cut-out
Notes:
•
The manufacturer reserves the right to change these specifications without notice.
•
The temperature and relative humidity settings displayed for ClimateLine are not measured values.
•
Check with your clinician/service provider before using the SlimLine air tubing with devices other than the S9 or
H5i.

Humidifier performance

The following settings have been tested at 22°C, 40% RH ambient conditions:
CPAP mask pressure
cm H O
2
4
10
20
a. AH- Absolute Humidity in mg/L.
b. BTPS- Body Temperature Pressure Saturated.
Symbols which appear on these devices
The following symbols may appear on your S9, H5i, power supply unit, air tubing or packaging.
Caution;
Not drip proof;
European RoHS;
Not for use on more than one patient;
Use distilled water only;
(In the US, Federal law restricts these devices to sale by or on the order of a physician.);
China pollution control logo 1;
6
RH output %
Setting 3 Setting 6
100
100
100
Read instructions before use;
Type BF equipment;
Lot number;
Lock/unlock;
China pollution control logo 2.
Injection molded plastic, stainless steel and silicone seal
Injection molded plastic, aluminium and thermoplastic elastomer
Flexible plastic and electrical components,
6'5" (1.98 m), 15 mm inner diameter
Flexible plastic, 6' (1.83 m), 15 mm inner diameter
Flexible plastic, 6'6" (2 m), 19 mm inner diameter
≤ 106°F (≤ 41°C)
Nominal system output AH
Setting 3
100 21
100 16
100 14
Follow instructions for use;
Class II equipment;
Part number; Serial number;
Maximum water level;
a
, BTPS
Setting 6
27
23
17
Drip proof;
Start/Stop; Manufacturer;
Direct current;
93 C
Disinfectable up to 200°F (93°C);
R
x
Remove tub to fill; Prescription only
b