Specifications; Unpacking; Applications - Ryobi D550H Operator's Manual

Chuck Capacity
Hammer Speed
No Load Speed
Input
Net Weight
* BPM = Blows Per Minute
INSTRUCTIONS
Your hammer drill has been shipped completely
assembled.
■ Carefully remove the tool from the box. Make sure
that all items listed in the packing list are included.
■ Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
■ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
You may use your hammer drill for the purposes listed below:
■ Hammer drilling in concrete, brick, or other masonry.
■ Drilling in wood.
■ Drilling in ceramics, plastics, fiberglass, and laminates.
■ Drilling in both soft and hard metals.
■ Using driving accessories, such as driving screws with screwdriver bits.
■ Mixing paint.

SPECIFICATIONS

UNPACKING

PACKING LIST
Hammer Drill
Carrying Case
Operator's Manual
If any parts are missing do not operate your tool until
the missing parts are replaced. Failure to do so
could result in possible serious personal injury.

APPLICATIONS

6
5/64 in. (2 mm) - 1/2 in. (12.7 mm)
Low (0-16,000 BPM*) & High (0 - 48,000 BPM*)
Low (0 - 1,000/min) & High (0 - 3,000/min)
120 Volts, 60 Hz, AC only, 5.5 Amps
WARNING:
5.75 lbs. (2.6 kg)