Table of Contents
Advertisement
304.80 mm
[12.000 in]
323.85 mm
[12.750 in]
9.53 mm
[0.375 in]
25.4 mm
[1.000 in]
© National Instruments Corporation
e.
Install the ground-screw/lock-washer into the enclosure, and
tighten it with a number 2 Phillips screwdriver.
f.
Tighten the PE ground strain-relief collar.
1000 V CAT I
600 V CAT II
50 µA MAX per channel
Figure 1. TBX-1316 Enclosure Mounting Hole Spacing
203.20 mm
[8.000 in]
254.00 mm
[10.000 in]
5
TBX-1316 High-Voltage Attenuator Terminal Block
342.90 mm
[13.500 in]
Advertisement
Table of Contents
