National Instruments TBX-1316 Installation Manual page 14

Electromagnetic Compatibility
For EMC compliance, operate this device with shielded cabling.
Note
CE Compliance
Refer to the Declaration of Conformity (DoC) for this product for any additional
Note
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification
appropriate link in the Certification column.
TBX-1316 High-Voltage Attenuator Terminal Block
Emissions................................................EN 55011 Class A at 10 m
Immunity ................................................EN 61326:1997 + A2:2001,
EMC/EMI ...............................................CE, C-Tick, and FCC Part 15
The TBX-1316 meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
, search by model number or product line, and click the
FCC Part 15A above 1 GHz
Table 1
(Class A) Compliant
14 ni.com