Russound CAV6.6-S2 Instruction Manual page 58

INSTALLER
INSTALLATION MENU
SOURCE NAMES (SrcNm)
This procedure allows the installer to customize the source names for the sources attached to
the CAV6.6. See Source Setup Menu on Page 55 and Source Names/Vol Trim - Flow
Chart on page 69
1. SOURCE NUM –
(Src #)
2. SOURCE NAME –
(Name)
SRC VOL TRIM (SrcVT)
This procedure allows the installer to adjust the output level of an individual source. The output vol-
ume is adjustable by 16 dB. At 0 dB (the default setting), the volume is at max output; at -16 dB the
volume is at the lowest setting possible for that source only. See Source Setup Menu on Page 55
and Source Names/Vol Trim - Flow Chart on page 69
1. SOURCE NUM –
(Src #)
2. TRIM LEVEL –
(Trim)
NUMERIC IR (NumIR)
Numeric IR allows the installer to program source specific number functions (Channel 12, Disk 89, etc.).
See Source Setup Menu on Page 55 and Numeric IR - Flow Chart on page 70
1. SOURCE NUM –
(Src #)
2. USE NUM IR? –
(NumIR)
3. HIGHEST NUM –
(High#)
4. NUMERIC TEXT –
(NmTxt)
5. PREFIX CMD –
(Prefx)
6. COMMAND TYPE –
(CmdTp)
58
Select the source number this name will be assigned to.
Select the name. SOURCE NUM will reappear on the LCD panel;
repeat the instructions for each source to be labeled.
Select the source number this level will be set for.
0 dB is max output volume, -16 dB is lowest setting.
Select the source number this function will be configured for.
Tells the system whether the source component has numeric
scrolling, such as 100-disc CD player. A selection of "no" dis-
ables Numeric IR and advances to SAVE CHANGES
Enter the highest possible number; for example, the 100-disc CD
player would have a max number of 100.
Select Numeric descriptive text.
Tells the system whether a command will be issued prior to the
selection of the numerical value (e.g., Disc 1,2). If "no," proce
dure advances to SUFFIX CMD (step 9)
Select the type of command (e.g., CD, TV, etc.).