Table of Contents
Advertisement
Federal Communications Commission Radio
Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference on his own expense.
This product contains a laser system and is classified as a "CLASS 1 LASER PRODUCT"
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure. This product contains no user-serviceable
parts. Attempted service by unauthorized personnel shall render all warranties null and void.
Changes or modifications not expressly approved by RuggedCom Inc. could void the user's
Should this device require service see the "Warranty and Service" section of this guide.
This product should be installed in a restricted access location where access can only be
gained by service personnel or users who have been instructed about the reasons for the
restrictions applied to the location and about any precautions that shall be taken; and access
is through the use of a tool or lock and key, or other means of security, and is controlled by
the authority responsible for the location.
RuggedCom®
CAUTION
CAUTION
authority to operate the equipment.
IMPORTANT
3
RuggedSwitch RSG2300 Installation Guide Rev108
Advertisement
Table of Contents
