LG ARUM072BTE5 Installation Manual page 170

LG MONITORING VIEW (LGMV)
DIAGNOSTIC SOFTWARE
Additional screens can be accessed by tabs on the main screen.
Additional screens include:
1. Cycleview: Graphic of internal components including:
• Compressors showing actual speeds
• EEVs
• Indoor units
• Liquid injection valves
• Temperature and pressure sensors
• Four-way reversing valve
• Outdoor fans showing status and speeds
2. Graph: Full screen graph of actual high and low pressures and
high and low pressure limits. A sliding bar allows viewing of
previously recorded data.
3. Control IDU: Enables user to turn on IDU's default setpoints of
86°F in heat mode or 64°F in cool mode.
4. Setting: Converts metric values to imperial values.
5. Making Data: Recording of real time data to a separate file
created to be stored on the user's computer.
6. Loading Data: Recorded data from a saved ".CSV" file can be
loaded to create an LGMV session.
7. Electrical Data: The Electric tab on the main screen is changed to
show the following:
• Inverter compressor
- Amps
- Volts
- Power Hz
- Inverter control board fan Hz
Images on these pages are examples of LGMV screenshots. Actual images may differ depending on the version of the software and the units
installed.
170
• Constant compressor
- Current transducer value
- Phase
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
LGMV Cycleview Screen.
LGMV Graph Screen.