Problem Of Internal Devices And Other Hardware - NEC Express5800/R110i-1 Maintenance Manual

Chapter 1 Maintenance
5.7

Problem of Internal Devices and Other Hardware

[?] Unable to access the internal or external devices (or such devices fail to operate)
 Are cables properly connected?

Make sure that the interface cables and power cord are properly connected. Also make sure that the
cables are connected in the correct order.
 Is the power-on order correct?

When the server has any external devices connected, power on the external devices first, then the
server.
 Did you install drivers for connected optional devices?

Refer to the manual that comes with the device to install its driver.
 Is option board setting correct?

Refer to the manual that comes with the board for details to make correct settings.

Some devices connected to the serial or parallel port, or USB port may require I/O port address or
operation mode settings. Refer to the manual that comes with the device to make correct settings.
[?] The keyboard or mouse does not work
 Is the cable properly connected?

Make sure that the cable is connected to the connector on the front or rear of the server.
 Is BIOS configuration correct?

Check the BIOS settings by using BIOS Setup Utility.
[?] Unable to access the hard disk drive
 Is the hard disk drive supported by the server?

Operation of any device that is not authorized by NEC is not supported.
 Is the hard disk drive properly installed?

Check the hard disk drive installation status and the cable connections.
[?] The numbers assigned to the hard disk drive bays do not match the numbers indicated in the OS
 Is the SATA drive connected in IDE mode?

In SATA IDE mode, the drive bays might be detected in a different order from the physical connection,
depending on the OS used.
Primary > Secondary
Master > Slave
Group1
Group2
36
Port0 : Primary Master
Port1 : Secondary Master
Port2 : Primary Slave
Port3 : Secondary Slave
Port4 : Primary Master
Port5 : Secondary Master
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
5. Troubleshooting