Problem Of Using Internal Devices And Other Hardware - NEC Express 5800 Series Maintenance Manual

Chapter 1 Maintenance
[?] DISK LED flashes
DISK LED flashes frequently even while the Hard Disk Drive is not accessed.
→
When Patrol Read is running, the DISK LED flashes even if the Hard Disk Drive is not being accessed. If
SATA Hard Disk Drive is used, the DISK LED may stay on.
[?] When N8190-153/154 is used, the names of the Fibre Channel controllers may appear with different names
on Device Manager
When N8190-153/154 is used in Windows Server 2012 or Windows Server 2008 R2 or Windows Server 2008,
a different controller name may be displayed per controller in Device Manager. It is not a problem in operating
the system.
To display correct controller name, run the following command stored in the EXPRESSBUILDER DVD and
reboot the system.
Windows Server 2012:
Drive letter of optical disk:\001\win\winnt\ws2012\elxfc\friendlyname.exe
Windows Server 2008 R2:
Drive letter of optical disk:\001\win\winnt\ws2008x64\elxstor\friendlyname.exe
Windows Server 2008 32-bit Edition:
Drive letter of optical disk:\001\win\winnt\ws2008\elxstor\friendlyname.exe
[?] When N8103-152 is used, the name of the RAID controller is different between on the Device Manager of
Windows and on WebBIOS/Universal RAID Utility.
When N8103-152 is used in Windows Server 2012, Windows Server 2008 R2, or Windows Server 2008, the name
of the RAID controller is different between on the Device Manager of Windows and on WebBIOS/Universal RAID
Utility. However, it is not a problem.
Device Manager
LSI MegaRAID SAS 9265CV-8i
WebBIOS/Universal RAID Utility
LSI MegaRAID SAS 9270CV-8i
5.7

Problem of Using Internal Devices and Other Hardware

[?] Fail to access the internal or external devices (or such devices fail to operate)
Are cables properly connected?
→
Make sure that the interface cables and power cord are properly connected. Also make sure that the
cables are connected in the correct order.
Is the power-on order correct?
→
When the server has any external devices connected, power on the external devices first, then the
server.
Did you install drivers for connected optional devices?
→
Some optional devices require specific device drivers. Refer to the manual that comes with the device to
install its driver.
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
5. Troubleshooting
35