Table of Contents
Advertisement
www.seagate.com
3.2.1
LEDs
Three board-mounted, right-angle LEDs shine through holes in the PCI bracket: one is for data activity, one is for drive
life, and one is for drive status. The LEDs are labeled on the bracket.
3.2.2
Troubleshooting the Nytro WarpDrive 6209 Card
The LEDs provide status information to diagnose problems with the Nytro XP6209 card. The following figure shows
the LED layout. You can also contact
Figure 9 Nytro XP6209 LED Diagram
Table 3 Status Indicators on a Running System
Name
Activity
Life
Seagate Nytro WarpDrive and Nytro XP6000, Rev. 1.12
Seagate Technology Support
Color
Green
On, blinking - Indicates data activity on the card. No action required.
Green
On, steady - Card has sufficient life remaining for programming and erasing the Flash memory.
No action required.
Yellow
On, steady - Card has approximately 10% or less of life remaining for programming and erasing the
Flash memory. Plan for replacements.
Red
On, steady - Card has no program or erase cycles left. Data can be read, but writes are at risk.
Back up data and copy to a new Nytro WarpDrive card.
Nytro XP6209 Card Characteristics
Services.
LED Description
19
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
