Software Installation Instructions; Windows Driver Installation; Linux Driver Installation - Seagate NWD-WLP4-200 User Manual

www.seagate.com
4. For highest performance, make sure that the PCIe slot is PCIe 3.0 and make sure that it has an active width of eight
lanes or sixteen lanes. The Nytro WarpDrive card functions with an active width of four lanes or two lanes, but
with reduced performance.
5. Secure the bracket to the system's chassis. Install the bracket screw, if applicable, or engage the system
retention mechanism to secure the card to the system's chassis.
6. Replace the cover, reconnect the power cords, and power up the system. Replace the server's cover,
reconnect the power cords, and reconnect any network cables. Turn on the power.
The Nytro WarpDrive card hardware installation is complete.
2.3

Software Installation Instructions

2.3.1

Windows Driver Installation

Download the latest Windows Server® 2012 R2 drivers from the Seagate website. To install the appropriate device
driver, follow these steps:
1. Go to this website:
https://www.seagate.com/support/solid-state-flash-storage/accelerator-cards/nytro-warpdrive-accelerator-card/
downloads/
2. Click the driver you need.
3. Open the Windows Driver Configuration Utility file and follow the instructions to install the driver.
2.3.2

Linux Driver Installation

Seagate provides open source drivers in the following ways:
Precompiled binaries to add to an existing installation using driver update disks or RPMs for

selected distributions.
Fusion-MPT™ source to add or update any distribution.

Download the latest Linux® drivers from the Seagate website. To install the appropriate device driver, follow these
steps:
1. Go to this website:
https://www.seagate.com/support/solid-state-flash-storage/accelerator-cards/nytro-warpdrive-accelerator-card/
downloads/
2. Click the driver you need.
3. Download the driver files and install the RPM files.
Seagate Nytro WarpDrive and Nytro XP6000, Rev. 1.12
NOTE The shape, size, and locations of components on your Nytro WarpDrive
card might vary from this illustration.
CAUTION The location must meet the 300 LFM (linear feet/minute) minimum
airflow requirement.
NOTE For all server types, do not ship the 6301 card installed or mounted
inside a server. Ship the card separately and install the card into the
server at its final destination. This prevents potential damage during
shipment. If the card is shipped installed in a server and is damaged
during shipment, the applicable warranty is void.
Software Installation Instructions
11