Changing The Device Language - Garmin Inreach MINI Owner's Manual

Coordinates: Sets the format used for geographical position
coordinates.
Datum: Sets the coordinate system used by the map.
Speed/Distance: Sets the unit of measure for distance.
Temperature: Sets the temperature units to Fahrenheit (°F) or
Celsius (°C).
Pressure: Sets the pressure units.
Bearing: Sets the north reference used on the compass to true
or magnetic north.

Changing the Device Language

1
From the main menu, select Setup > Language.
2
Select a language.
Adding Owner Information
1
From the main menu, select Setup > Owner Info.
2
Select OK, enter your information, and select
Device Information
Support and Updates
Go to explore.garmin.com
inReach devices.
• Product registration
• Firmware updates
• Data uploads and syncing your device with your account
Attaching the Spine Mount Adapter
1
Remove the short screw
2
Secure the spine mount adapter
device using the long screw
TIP: The spine mount adapter fits over the carabiner strap.
You can attach the adapter over the strap or remove the
strap.
Device Information
.
for easy access to these services for
from the carabiner strap
over the back of the
included with the device.
Attaching a Lanyard
1
Insert the loop of the lanyard through the slot in the device.
2 Thread the other end of the lanyard through the loop, and pull
it tight.
3
If necessary, attach the lanyard to your clothing or backpack
to tether it during an activity.
Locking and Unlocking the Keys
You can lock the keys to prevent inadvertent key presses.
1
Select > Lock Screen.
2
Select > Unlock to unlock the keys.
Device Care
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
.
The device is water resistant to IEC Standard 60529 IPX7. It can
withstand accidental immersion in 1 meter of water for 30
minutes. Prolonged submersion can cause damage to the
device. After submersion, be certain to wipe dry and air dry the
device before using or charging.
Thoroughly rinse the device with fresh water after exposure to
chlorinated or salt water environments.
Cleaning the Device
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
Troubleshooting
Maximizing Battery Life
• Turn on the Extended Tracking setting
page 4).
• Reduce the backlight timeout
• Reduce the value of the tracking Log Interval and Send
Interval settings
• Turn off Bluetooth wireless technology
page 4).
• Turn off ANT+ wireless technology
page 4).
Resetting the Device
If the device stops responding, you may need to reset it. This
does not erase any of your data or settings.
1
Hold and
2
Hold to turn on the device.
Restoring All Default Settings
You can restore all device settings to the factory default values.
NOTICE
(Tracking Settings,
(Display Settings, page
(Tracking Settings, page
(Bluetooth Settings,
(ANT+ Sensor Settings,
until the device turns off.
4).
4).
5