Garmin inReach Mini Quick Start Manual

Hide thumbs Also See for inReach Mini:

Download this manual

Garmin inReach Mini

Paring mobile device to Garmin:

From app store on your mobile device,

install and open Earthmate app.

Turn on Garmin with power button on top

of device (hold power button down to

power on/off)

Make sure mobile device and Garmin are

within 10 feet of each other when pairing

On the Earthmate app click connect from

the bottom screen

Once searching for device appears on

phone move on to next step to continue

pairing

From the main menu on the Garmin arrow

down until you reach the Bluetooth screen

Use the arrows to scroll to Pair device

Select pair device using the OK button on

the top right-hand side of Garmin

Page 1 Garmin inReach Mini Paring mobile device to Garmin: From the main menu on the Garmin arrow From app store on your mobile device, down until you reach the Bluetooth screen install and open Earthmate app. Use the arrows to scroll to Pair device...
Page 2 Click not now. Garmin device appears in the list When the Garmin device appears in the list click on that device to connect From the bottom of the screen on your...
Page 3 Hit send on your Earthmate app When you get to the messages screen use the Garmin Quick connect document to add all managers numbers to your message. (Note: some phones require that you put the contacts in your phone contacts prior to...
Page 4 On the Garmin a small arrow will pop up in from AzRA) to get the text to go through, the Garmin will make a noise when the message is the top of the main screen, once the successfully sent. message has gone through you will see the...
Page 5 From the Messages page, select OK. mobile device. Select a conversation, and select Reply Sending a test message from the Garmin inReach Mini (ideally this will Select an option: be done at AzRA during load out) To start with a pre-written message, select Pick Quick Text.