Table of Contents
Advertisement
Controlling the projector remotely through a web
browser
Once you have the correct IP address for the projector and the projector is on or in
standby mode, you can use any computer that is on the same local area network to
control the projector.
1.
Enter the address of the projector in the address bar of your browser and click
Go.
2.
The remote network operation page opens. This page (Crestron eControl)
allows you to operate the projector as if you were using the remote control or
control panel on the projector.
1
1
2
The tools page allows you to manage the projector, configure the LAN control
settings and secure access of remote network operation on this projector.
Operation
44
To switch input source, click on your desired signal.
The source list varies according to the connectors available on
the projector. ''Video'' stands for the Video signal.
Menu
Auto PC
Blank
Input
(
)
(
)
(
)
(
)
OK
See
"Remote control" on page 10
Activates the selected On-Screen Display (OSD)
menu item.
2
for details.
Advertisement
Table of Contents
