Closing The Case - Bosch AMC2-16IOE Installation Manual

22 en | Installing
4.4

Closing the Case

Before aligning the covers, unplug any pluggable screw
connectors. Insert the hooks on the lower edge of the front
cover into the lugs on lower edge of the plastic back cover [1].
Please ensure that the BOSCH logo is not upside-down. The
upper edge of the front cover now aligns with the two-point
snap-in closures on the upper edge of the back cover [2], and
may thus be clicked gently into place.
Hence the closing process is the reverse of the opening process.
Figure 4.4: Closing the extension case
2016-11 | AMC2-16IOE |
AMC2 Extensions
Bosch Sicherheitssysteme GmbH