12
en | Introduction
3
Introduction
3.1
Description
3.1.1
Extension AMC2-16IOE
The extension board AMC2-16IOE can be used with an AMC2
controller. It serves additional inputs and outputs.
Figure 3.1: The extension board AMC2-16IOE
The AMC2 has eight analog input devices and eight relay
outputs. With its analog input devices, the AMC2 verifies, for
example, if a lock is closed or open. The relay outputs can be
used to activate lock mechanisms if access is granted, or
activate an external alarm system if an intrusion or system alert
is detected.
The AMC2-16IOE electronics are completely covered by a plastic
housing.
Notice!
The AMC2-16IOE has no display. The information about the
input and outputs will be shown on special pages of the AMC2
display.
2016-11 | AMC2-16IOE |
AMC2 Extensions
Bosch Sicherheitssysteme GmbH