Table of Contents
Advertisement
Installing the 2-node scalability card
Use this information to install the 2-node scalability card on a blade server.
To install the 2-node scalability card, complete the following steps:
Step 1.
Before you begin, read "Safety" on page iii and "Installation guidelines" on page 23.
Step 2.
Stand the blade servers upright on a clean, flat work surface, with the scalability connector on the
blade servers facing up.
Step 3.
Release the lower handles (rotate the lower handles down) to allow the blade servers to sit flat on
the work surface.
Step 4.
Align the pins on the bottom of the IBM 2-node scalability card with the holes on the scalability
connector on the blade server.
Step 5.
Press down firmly so that the 2-node scalability card is flush with the scalability connector on the
blade server.
62
BladeCenter HX5 Blade ServerInstallation and User's Guide
Advertisement
Table of Contents
