Amana PTAC Service Instructions Manual page 31

PROPER INSTALLATION
press the HEAT
either the up or down arrow
second unoccupied setback temperature.
Cooling example: 72
temperature) = 76 (operational set point).
0
7. Press HEAT key to scroll to
pied setback time. Press either the up or down arrow
to the desired second unoccupied setback time.
Example: Operating set point would be 76
72, one hour (1.0 hour) after guest leaves room.
8. Press HEAT key to scroll to
pied setback temperature. Press either the up or
down arrow to the desired third unoccupied set-
back temperature.
9. Press HEAT key to scroll to
key until comes up. Press
to the desired
(guest set point) + 4 (Setback
0 0
second unoccu-
instead of
0
third unoccu-
third unoccu-
pied setback time. Press either the up or down arrow
to the desired third unoccupied setback time.
10. To exit configuration mode:
Press the OFF
feature mode will also automatically exit if no keys
are pressed for a period of two (2) minutes.
The changes made in configuration mode are now in
effect.
NOTE: Additional codes are present and may be accessed
within this menu. Contact the manufacturer for additional
information.
key. NOTE: Configuration
31