Download Print this page
Amana Ptac Maintenance Manual

Amana Ptac Maintenance Manual

Package terminal air conditioner/heat pump standard and remote applications

Advertisement

AIR CONDITIONER/HEAT PUMP
Part No. 11113313
Printed in USA
PACKAGE TERMINAL
Standard and Remote Applications
`
T
O PREVENT PROPERTY DAMAGE, PERSONAL INJURY OR DEATH DUE TO
ELECTRICAL SHOCK, DISCONNECT THE ELECTRICAL POWER SUPPLY BEFORE
CLEANING THIS UNIT.
T
O AVOID THE RISK OF PROPERTY DAMAGE, ELECTRICAL SHOCK OR
PERSONAL INJURY, CLEAN AIR FILTERS AND COILS REGULARLY.
OR SEVERLY RESTRICTED FILTERS OR COILS REDUCE AIRFLOW WHICH CAN
CAUSE DRASTIC EFFICIENCY LOSS AS WELL AS SEVERE COMPONENT DAMAGE
TO COMPRESSORS, ELECTRIC HEATER OR FAN MOTOR.
CLOGGED FILTERS AND/OR COILS MAY CREATE FIRE HAZARD AND WILL VOID
THE WARRANTY.
S
OME LOCAL CONDITIONS AND ENVIRONMENTS CAN CAUSE FUNGI AND OTHER
MATERIAL TO GROW INSIDE THE
AS WELL AS OTHER FOREIGN MATERIAL, SIMILAR TO DRYER LINT IN YOUR
CLOTHES DRYER, ARE FIRE HAZARDS.
CLEAN THE UNIT'S COILS, BLOWER WHEEL AND BASEPAN PER THE
INSTRUCTIONS CONTAINED IN THIS MANUAL.
This manual must be left with the owner
of the equipment.
M
AINTENANCE
& C
LEANING
WARNING
WARNING
WARNING
PTAC
T
UNIT.
HIS MATERIAL WHEN DRIED,
B
E SURE TO THOROUGHLY CHECK AND
M
ANUAL
Made in USA
C
LOGGED
I
N EXTREME CASES,
January 2004

Advertisement

loading

Summary of Contents for Amana Ptac

  • Page 1 CLOGGED FILTERS AND/OR COILS MAY CREATE FIRE HAZARD AND WILL VOID THE WARRANTY. WARNING OME LOCAL CONDITIONS AND ENVIRONMENTS CAN CAUSE FUNGI AND OTHER PTAC MATERIAL TO GROW INSIDE THE UNIT. HIS MATERIAL WHEN DRIED, AS WELL AS OTHER FOREIGN MATERIAL, SIMILAR TO DRYER LINT IN YOUR CLOTHES DRYER, ARE FIRE HAZARDS.
  • Page 2: Maintenance And Cleaning

    To properly maintain the operational performance of Before cleaning the vent screen, disconnect power to your PTAC unit, it is extremely important that the inlet the unit by unplugging the power cord at the wall outlet air filter be cleaned once per month or more often if or subbase, or disconnect power at the fuse box or operated in dusty or dirty locations or conditions.
  • Page 3: Wall Sleeve

    The use of harsh or caustic cleaning agents or materials such as bleach or coil cleaners that are not designed for PTAC products will cause damage or deterioration of the aluminum fin or coil material and is not recom- mended.
  • Page 4: Clearance Check

    Maintenance and Cleaning Clearance Check Clearances around the unit should also be checked to make sure that the intake air and discharge air paths have not become blocked or restricted. A minimum of eight inches clearance is needed from unit to furniture , beds, or other objects for proper operation.