Amana PTAC 24” Installation Instructions

PTAC 24"
Wall Sleeve Gasket
• Remove paper backing and adhere provided gasket material
to the two vertical baffles as shown below
• Gasket material must be in place before exterior grille is
assembled to the wall sleeve
NOTE: These gaskets will prevent air recirculation, premature
failure of the compressor, and excessive overload cycling.
As a professional installer you have an obligation to
know the product better than the customer. This
includes all safety precautions and related items.
Prior to actual installation, thoroughly familiarize yourself
with this Instruction Manual. Pay special attention to all
safety warnings. Often during installation or repair it is
possible to place yourself in a position which is more
hazardous than when the unit is in operation.
October 1997
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION
ATTENTION INSTALLING PERSONNEL
Installation Instructions
Remember, it is your responsibility to install the
product safely and to know it well enough to be able to
instruct a customer in its safe use.
Safety is a matter of common sense...a matter of
thinking before acting. Most dealers have a list of
specific good safety practices...follow them.
The precautions listed in this Installation Manual should
not supersede existing practices but should be
considered as supplemental information.
Gasket
20200601