Procedures of disassembling / assembling
Removing procedure of the knives
1. Remove fixed knife link 1.
2. Remove three screws 2, and remove throat plate unit
3. Remove two screws 4 and 5, and remove fixed plate 6.
4. Remove moving knife 7 and fixed knife 8 respectively.
Installing procedure of the knives
Assemble them by reversing the removing order.
Caution in disassembling / assembling
3.
™ Washers attached with knives are
™ Be careful not to mistake the
−
69
−
different from each other. Be
careful not to mistake when
assembling.
relations of positions between the
washers and the knives.