Printing On Special Media - Samsung PROXPRESS M332 SERIES User Manual

Media and tray
3 Squeeze the Multi-purpose (or Manual feeder) tray paper width guides
and adjust them to the width of the paper. Do not force them too much,
or the paper will bent resulting in a paper jam or skew.
• When printing the special media, you must follow the loading guideline
(See "Printing on special media" on page 41).
• When papers overlap when printing using Multi-purpose (or Manual
feeder) tray, open tray 1 and remove overlapping papers then try
printing again.
4 When you print a document, set the paper type and size for the Multi-
purpose (or Manual feeder) tray (see "Setting the paper size and type" on
page 45).
The settings made from the machine driver override the settings on the
control panel.
a To print in application, open an application and start the print menu.
b Open Printing Preferences (See "Opening printing preferences" on
page 49).
c Press the Paper tab in Printing Preferences, and select an appropriate
paper type.
For example, if you want to use a label, set the paper type to Label.
d Select MP Tray (or MP Tray) in paper source, then press OK.
e Start printing in application.
If your machine has Multi-purpose (or Manual feeder) tray, press OK on
the control panel each time you load a sheet of paper.
4

Printing on special media

The table below shows the special media usable in tray.
The media is also shown in the Printing Preferences. To get the highest
printing quality, select the proper media type from the Printing preferences
window > Paper tab > Paper Type (see "Opening printing preferences" on page
49).
For example, if you want to print on labels, select Labels for Paper Type.
• When using special media, we recommend you feed one sheet at a time
(see "Print media specifications" on page 110).
• Illustrations on this user's guide may differ from your machine
depending on its options or models. Check your machine type (see
"Front view" on page 20).
2. Menu Overview and Basic Setup
41