3-14 FPC Holder Assembly
1. Before you disassemble the FPC holder assembly
you should remove:
* All covers (See page 3-1, 3-9, 3-10)
* Scanner unit (See page 3-2)
* Engine unit. (See page 3-10)
2. Remove one screw securing the FPC holder
to the main frame.
Samsung Electronics
Disassembly and Reassembly
3. Pull the part ¨ out to unlatch the FPC holder
and pull the sensor actuator ≠ out, then slide
the FPC holder in the direction of Æ.
FPC holder
¨
4. Remove the FPC cable from the main frame.
Æ
≠
3-11