Installing Your Thermostat - Trane TR-BAC-1000-DX2 User Manual

3. Setting the Sleeping
Press and Hold M to set the sleeping.
Press to confirm, to cancel.
4.Selecting manual and programmable
M
Press and hold , will flash. Press
will flash. Press to select manual and press
to select weekly programmable.
M
Press to set minutes of the time;
Press to set hours of the time;
M
M
Press to set week of the time;
Press M into the adjustment of programmable.
5. Adjusting the weekly programmable
After the above steps, press M into programmable.
Then press M to change the different items.
Press or to set the relative values.
The order is Minute adjusting→ Hour adjusting
→ Week adjusting→ Minute timing-on → Hour
timing-on→ Minute timing-off→ Hour timing-off→
Temperature adjusting (
"12345","6","7", is "5+1+1" programmable mode,
every mode has two times zones and a time
temperature setting)
First Period
Week
Turn-on Turn-off Set Turn-on
me me temp. me
Mon. to Fri. 1 2 3 4
Sat. 7 8 9 10
Sun. 13 14 15 16
Wiring your thermostat
M
AC24V
IP20
6. Setting functions and options
During power off, press and hold
will flash.
time for 5 sec. to system functions. Then press M
to change the di
relative values.
M
again,
No Func on
Temp.
1
Calibra on
2 Fan Control
3 Lock
4 Heat/Cool
5 Min. Set Temp.
6 Max. Set Temp.
7 Time Display
8 Display Mode
9
Minimum Output
Second Period
10 on/off Time
Turn-off Set
me temp.
Deadzone
5 6
11
Temperature
11 12
17 18
Dimension of your thermostat
M at the same
f
ferent items. Press or to set the
All the settings will confirm automatically
Se ng & Op ons Default
-9℃ to 9℃ 0℃
0:When room temp. reaches
the setpoint, the fan will turn
off.
0
1:When room temp. reaches
the setpoint, the fan will turn
to low speed.
0 ： All the bu ons are locked
except POWER 1
1 ：All the bu ons are locked
0
0：Cool only 1：Heat/Cool
5-15℃，default is 10℃ 10℃
5-35 ℃， default is 30 ℃ 30 ℃
0:12 hours 1:24 hours 0
0：Display set temp. only
1：Display both set temp. and 1
room temp.
1-5 minutes
3
0 ~ 5℃. 0
Unit: mm
86.0
13.2 29.6
65.9

Installing your thermostat

This product is suitable for standard 86mm wall
box or european 60mm round box.
1. Connect the wire of power and other equipment into
the terminals.
2. Fix the wall plate into the wall box by a screwdriver.
(Fig 3)
3. Connect the LCD board into the wall plate.
4. Finished.
WARNING:
Please arrange the professional technician
to install this product according to installation drawing and
instruction.
RISK OF ELECTRICAL SHOCK.
Disconnect power supply
before making electrical connection. Contact with components
carrying hazardous voltage can cause electrical shock and may
result in severe personal injury or death.instruction.
50.0
(Fig 1)
(Fig 2)
(Fig 4)