Asko T208H.W.AU Instructions For Use Manual page 37

FAILURE DISPLAY
In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit.
Error 3
Errors indicated on the display unit (depending on the model) may include the following:
Problem/ Error indication on the display
error
ERROR_0
E-O - Please contact Service.
E0 – Please, call service centre.
ERROR_1
E-1 - Thermistor fault. Please contact Service.
E1 – Thermistor error. Please, call service centre.
ERROR_3
E-3 - Pump failure. Please contact Service.
E3 – Pump error. Please, call service centre.
ERROR_4
E-4 - Please clean filters or contact Service.
E4 – Please, clean the filters or call service centre.
ERROR_5
E-5 - Max program time
E5 – Max program time
Press and hold the INFO button to
Info EXIT
display the error description.
Press the 6 EXIT button to return to
Main Menu.
5
Switch off the dryer and turn it back on.
What to do?
Control unit failure.
Call service centre.
Temperature sensor failure.
Call service centre.
Failure on the pump for pumping the
condensate into the condensate tank
Call service centre.
Control unit failure.
Clean the filters. See chapter
"CLEANING AND MAINTENANCE" or
call service centre.
Call service centre.
37