Asko T208H.W.AU Instructions For Use Manual page 31

CLEANING THE HEAT PUMP FILTER
During cleaning, some water may be spilled. It is
1
therefore recommended to place an absorbent
cloth on the fl oor.
Open the outer cover.
Hold the levers on the inside cover and rotate
2
them upwards.
Remove the inside cover.
Use the handle to pull out the heat pump fi lter.
3
Pull the foam part of the heat pump fi lter from the
4
housing. Wash it under running water and dry it
before replacing it in the fi lter housing.
Filter could be clean in the washing machine, rinse
program with low spin speed. Dry it before replacing it
in the fi lter housing.
Clean the foam fi lter at least after every 10 drying
cycles or if necessary.
31