Table of Contents
Advertisement
Chapter 1 Quick Start
If the Sound or Operation Is not as You
Expect
If, as you modify the settings, the sound or operation is no longer as you
expect and you are unable to restore the correct settings, you can execute the
Factory Reset operation to reset all settings to their factory condition.
fig.1-29
4, 5
2
1
Press [SYSTEM].
[SYSTEM] will light.
2
Hold down [PARAMETER
fig.1-30
FACTORY RESET
SYSTEM
3
Turn [PATCH/VALUE] to select "ALL."
fig.1-30a
FACTORY RESET
ALL
4
Press [WRITE].
The following screen will appear.
fig.1-31
Are You Sure?
5
If you wish to execute factory reset, press [WRITE].
After the data has been initialized, the following screen will appear.
fig.1-09
P01 LATIN
01
* If you decide not to execute, press [EXIT].
30
3
] to access the following screen.
[WRITE]
[WRITE]
[WRITE/EXIT]
Conga
1
When you execute factory
reset, the edited contents
will be lost.
You can make your
selection rapidly by using
the Skip function (p. 32).
It is also possible to
initialize specific data, such
as only the patches or only
the system settings. For
details, refer to "Restoring
the Factory Settings" (p.
85).
Advertisement
Table of Contents
