Table of Contents
Advertisement
MIDI Implementation
* This is transmitted only on the channel which is assigned to the pad part and the
percussion parts.
Modulation (Controller number 1)
Status
2nd byte
BnH
01H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
* When the [LFO PITCH] knob is turned, the corresponding value will be transmitted.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
Foot control (Controller number 4)
Status
2nd byte
BnH
04H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
* The HPD-15 tramsmits a value corresponding to the position of the pedal connected to
the EXP PEDAL/HH CTRL jack.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
Data Entry (Controller number 6)
Status
2nd byte
BnH
06H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
mm = The value of the parameter specified by RPN.
* When a pattern is selected or adjust the Bend Range setting, the pitch bend sensitivity of
the sequencer pattern data will be transmitted.
* This is transmitted only on the channel which is assigned to the melody parts.
Values for the RPN parameter, on the normal mode of HPD-15, are as follows.
RPN
Data entry
MSB LSB
MSB LSB
00H 00H
mmH ---
7FH 7FH
--- ---
Volume (Controller number 7)
Status
2nd byte
BnH
07H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
*
When the [LEVEL] knob is turned in the melody parts, the corresponding value will be
transmitted.
*
This is transmitted only on the channel which is assigned to the melody parts and the percussion parts.
* When a pattern is selected, the part level of the sequencer pattern data will be transmitted.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
Pan (Controller number 10)
Status
2nd byte
BnH
0AH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 40H - 7FH (Left - Center - Right)
* When the [PAN] knob is turned, the corresponding value will be transmitted.
* When a pattern is selected, the part panpot of the sequencer pattern data will be transmitted.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
Expression (Controller number 11)
Status
2nd byte
BnH
0BH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH
102
3rd byte
vvH
3rd byte
vvH
3rd byte
mmH
Explanation
Pitch Bend Sensitivity
mm: 00H - 18H (0 - 24 semitones)
RPN null
set condition where RPN is unspecified.
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
* When the [LEVEL] knob is turned, the corresponding value will be transmitted.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
Effect Control 1 (Controller number 12)
Status
2nd byte
BnH
0CH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH
* When the [M-FX DEPTH] knob is turned, the corresponding value will be transmitted.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
General purpose controller 1 (Controller number 16)
Status
2nd byte
BnH
10H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
* The HPD-15 tramsmits a value corresponding to the strike position of the pad A1.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
General purpose controller 2 (Controller number 17)
Status
2nd byte
BnH
11H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
* The HPD-15 tramsmits a value corresponding to the strike position of the pad A5.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
Hold 1 (Controller number 64)
Status
2nd byte
BnH
40H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
* This message is transmitted with the value 7FH when turned on the [ROLL/HOLD]
button or value 00H when turned off.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
Sostenuto (Controller number 66)
Status
2nd byte
BnH
42H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H, 7FH (0:release Modify Lock, 127:Modify Lock)
* This message is transmitted with the value 7FH when the Modify Lock is done or
transmitted with the value 00H when the Modify Lock is canceled.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
Soft 1 (Controller number 67)
Status
2nd byte
BnH
43H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H (0)
* This message is transmitted with the value 00H when the Modify Clear is done.
*
This is transmitted only on the channel which is assigned to the pad part and the percussion parts.
* Transmitted when the HPD-15 is in play for pattern in which this message is recorded.
Sound Controller 1 (Controller number 70)
Status
2nd byte
BnH
46H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0, 127)
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
Advertisement
Table of Contents
