Problems At Startup With Guitar Tracks 4 - Roland V-Studio VS-20 Owner's Manual

Problems at Startup with Guitar Tracks 4

Problem Points to check
Could numerous applications be
running?
Can't start up
Could memory-resident programs
be running?
Could you be using other music
application software?
"Audio Driver Error" is
displayed
Are the audio driver settings
appropriate?
When you start up Guitar Tracks 4,
the parameters will be at their fixed
values, regardless of the physical
positions of the SENS knob, MIDI
The VS-20's knob BACKING knob, DAW OUTPUT
positions do not match knob, DIRECT MONITOR knob, and
the parameter values in OUTPUT LEVEL knob, so the
Guitar Tracks 4 parameters will not match the state
of the VS-20's panel.
In addition, INPUT SELECT will
automatically be set to GUITAR/
BASS.
Action
It may be that Guitar Tracks 4 cannot start up because there is insufficient memory.
Close other applications before you start up Guitar Tracks 4. If an error still appears, try
restarting Windows.
Memory-resident programs such as anti-virus software may prevent Guitar Tracks 4
from running correctly. Try closing such software before starting Guitar Tracks 4.
If Media Player or any other application that has audio playback capability is running,
Guitar Tracks 4 won't be able to use the audio driver, and an error appears when Guitar
Tracks 4 is started. Close the audio playback application, and then start Guitar Tracks 4
again.
If an audio driver not being used by Guitar Tracks 4 is installed, try either disabling that
driver or disconnecting the corresponding audio interface from your computer.
Try changing the "Audio Driver Settings" (p. 24).
Adjust the knobs once again.
Troubleshooting
37