Restoring The Midi Settings To The Factory Settings - Boss Dr. Sample SP-303 Owner's Manual

Chapter 7. Using the SP-303 With Other MIDI Devices
Bank C Pad 1
Pad 2
Pad 3
Pad 4
Pad 5
Pad 6
Pad 7
Pad 8
Bank D Pad 1
Pad 2
Pad 3
Pad 4
Pad 5
Pad 6
Pad 7
Pad 8
* Tone assignments for some rhythm machines may differ
from those listed above. In such cases, refer to the owner's
manual for your rhythm machine and assign the tones
according to the rhythm machine's tone assignments.
Restoring the MIDI Settings
to the Factory Settings
To restore the MIDI settings, including the MIDI channel and
MIDI Sync mode settings, to the original factory settings, use
the following procedure.
1. Turn the power switch OFF.
2. Hold down [EXT SOURCE] and slide the POWER
switch to ON.
The MIDI settings are set as shown below.
MIDI Channel: 1
MIDI Sync Mode: Aut (Auto Sync)
58
Chinese Cymbal
Ride Cymbal (Bell)
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibra-slap
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Low Conga
High Timbale
Low Timbale
Agogo