Quick Start; Making Connections; Mixer Settings - Boss Dr. Sample SP-303 Owner's Manual

QUICK START

Making Connections

The SP-303 does not contain an amp or speaker. To hear
sound, either connect an amplifier and speakers or use
headphones. Refer to the following diagram and connect the
SP-303 to the other equipment.
fig.Q01
to an AC Outlet
Stereo Headphones
DJ system setup
fig.Q02
LINE
OUT
LINE
IN
When sampling from a record, set the mixer fader to the
Turntable position (maximum).
The volume level during sampling is adjusted by the SP-
303's REC level (p. 28, 30) and by the mixer's effect send
level.
Audio Set / Amplified Speaker etc.
AC Adaptor
(ACI or ACB series)
CH 1:
LINE IN
SP-303
* Audio cables, MIDI cables, stereo headphones, and
microphones are not included. These may be purchased
separately from your dealer.
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
LINE IN
Audio Cable
OUTPUT
MIDI cable
MIDI OUT
MIDI Sequencer etc.
CH 2: EFFECT
PHONO IN SEND
Turntable

Mixer settings

CH 1 Input: line
CH 2 Input: PHONO
* Settings may be different depending on the mixer. For details
refer to the owner's manual for your mixer.
CD/MD player
Microphone
Effect: OFF
Effect: ON
11