Modifying A Marked Time Location; Clearing A Mark - Roland VXpanded VS-880 Owner's Manual

Chapter 2 Before you start (VS-880 terminology)

Modifying a marked time location

1. Move to the Mark Point whose time you wish to modify. Use [PREV][NEXT].
2. Press [LOCATOR].
3. Press PARAMETER[
number that you wish to modify).
4. Input the desired time. Rotate the TIME/VALUE dial.
The time of a mark point can be modified only within the range that lies between the preced-
ing and following mark points.

Clearing a mark

Clearing a Mark Point
Assigning mark points makes searching convenient, but creating too many mark points can actual-
ly make searching less convenient. It is a good idea to clear (erase) mark points that are no longer
necessary.
1. Move to the mark point that you wish to clear (erase).
2. While holding down [CLEAR], press [TAP] and the mark point will be cleared.
If mark points exist after the mark point that was cleared, the subsequent mark point numbers
will be incremented.
Clearing all Mark Points
1. While holding down [SHIFT], hold down [CLEAR] and press [TAP].
The display will ask ÒClear ALL Marker?Ó so press [YES]. To cancel without clearing, press
[NO].
60
] several times until "LOC
M1 M2 M4
M3
M1 M2 M3
M1 M2
" appears (
M5
TIME
M4 M5
Time
M3 M4
Time
is the mark point