Table of Contents
Advertisement
Settings for the GK Pickup (GK Setup)
The Type of Settings
GK SETTING Settings
You can store three sets of settings in the VGA-3.
This conveniently allows you to prepare separate settings for
a multiple number of guitars equipped with a GK pickup.
fig.0022
Set A
GK DIRECTION
GK PHASE
GK DIRECTION
GK S1/S2
GK PHASE
GK SENS 1–6
GK S1/S2
GK LEVEL
GK SENS 1–6
GK LEVEL
1. Rotate [GUITAR TYPE] to select "ST" (GK SETTING).
2. Press a MEMORY button [1]–[3] to select the GK SETTING
set you want to enable (the settings you want to change).
Memory button
[1]
Set A
[2]
Set B
[3]
Set C
* There is no need to change the settings if you are making them
for the first time or if you are not using multiple GK settings.
In this case, select [1] Set A, the factory default setting.
12
Set C
Set B
GK DIRECTION
GK PHASE
GK S1/S2
GK SENS 1–6
GK LEVEL
Setting
GK DIRECTION Setting
This sets the direction of the GK pickup's installation.
1. Rotate [GUITAR TYPE] to select
"LP" (GK DIRECTION).
2. Press the MEMORY button [1] or [2] to select the
direction in which the pickup is attached.
Memory button
[1]
NORMAL
In this direction, the cable exits on
the side of string 6.
[2]
REVERSE
In this direction, the cable exits on
the side of string 1.
fig.0030
NORMAL
string 6 string 1
* If it is difficult to determine the direction in which the GK
pickup was installed on a GK compatible guitar, try it out
initially at the [1] NORMAL setting.
If there is no response from the meter when you play string 6
during the GK SENS 6 settings (p. 13), but there is a response
when you play string 1, change the setting to [2] REVERSE.
Setting
REVERSE
string 6 string 1
Advertisement
Table of Contents
