Sample Settings - Roland CUBE 20xl BASS Owner's Manual

Sample Settings

ALL ROUND (SUPER FLAT)
[SHAPE] Switch: OFF
SLAP BASS (SESSION)
[SHAPE] Switch: ON or OFF
FINGER & FRETLESS (BASS 360)
[SHAPE] Switch: OFF
ROCK RIFF (CONCERT 810)
[SHAPE] Switch: ON or OFF
An original amp featuring a wide-range frequency response.
This amp type enables clear reproduction of your instrument's sound.
This also makes it perfect when connecting bass modeling processors
or using sound modules like bass synth.
In addition, you can exploit the equalizer's capabilities to create the
perfect bass sound for any musical genre from rock to jazz
When POLY OCTAVE is turned on, the entire range of sound, from bass
to treble, will become much more robust.
This setting cuts the midrange for a great slap bass sound.
Setting the SHAPE switch to ON further boosts the low and high ends.
To get a crisp slap sound, lower the MIDDLE setting and raise the
TREBLE. This emphasizes the brightness of the string sound, resulting
in a slap sound with a lighter pull sound. By applying COMP, you can
greatly enhance the clarity of the sound.
To get that attacking sound used in rock music, raise the BASS and
MIDDLE settings to produce a sound with greater power.
This bass sound made its appearance in the '70s.
This is suited for a Jazz Bass with a rear pickup used. This produces
a warm, contoured sound when the bass is fi ngered near the rear
pickup.
In addition, using this setting while playing harmonics in combination
with a chorus and a delay enables sounds featuring exquisite
reverberation.
This is a fat, powerful standard bass sound.
Raise the MIDDLE setting to produce a clear picking sound when the
bass is picked.
If you want a fatter low end, set the SHAPE switch to ON.
Raising the DRIVE results in an even fatter distortion sound.
9