Effects (Basic); Naming A Kit - Roland HandSonic 10 Owner's Manual

Getting Familiar

EFFECTS (Basic)

KIT Button
1. Press [KIT], then press [STEEL DRUM], then [EDIT], so you see
<INST> in the display again.
2. Press the [
Verify that the [EFFECT] button is also lit.
3. Press the [
Here is where you can change the effect being used. More about effects will be explained on page 21 and 30.
Short Cut Access to Effects Editing
While holding down the [EDIT] button, press [EFFECT].

Naming a Kit

1. Press [KIT], then press [STEEL DRUM], then [EDIT] so you see
<INST> in the display again.
2. Press the [
3. Press the [
4. Press the [
5. Use the [+]/[-] buttons or Control knob to change the name as you desire.
Use the [
12
EFFECT Button
] cursor until you see <EFFECTS> in the display.
] and you will see <Type> in the display.
] cursor until you see <KIT/MIDI> in the display.
], and you will see <Kit Volume>.
] again and you will see:
] or [ ] to move between the letters.
STEEL DRUM Button
EDIT Button
CURSOR